SPS

Removal of stock emblems on front and sides:

1. To remove the front emblem, open the hood and reach behind the fascia to the rear of the stock emblem. To remove the side emblems, remove the fender liners from the inside of the wheel wells.
2. Locate the pinch nut on the rear side of the emblem.
3. Using a pair of pliers, twist and pull the nut away from the emblem.
4. Once started, the nut can be removed by hand.
5. Pull the emblem from its position.

To install the new emblems:

1. Insert the new emblem into position.
2. Reinstall the original pinch nut by pressing and twisting the nut against the body panel until it is tight and the emblem is secure.

To remove the stock emblem from the rear of 97+ coupes:

1. Pry the original emblem from the rear reflector using a small flathead screwdriver or other prying tool.

To install the new emblem onto the rear of 97+ coupes:

1. Thoroughly clean the area beneath the emblem using Goo-Gone or other cleaning agent.
2. Before applying the new emblem, be sure that the surface of the car’s reflector panel is clean and dry.
3. Remove the backing paper from the rear of the new emblem.
4. Make sure the emblem is right-side-up and press the emblem firmly into place.